Noted. This paper is in our queue now. Check back tomorrow.
We could not record that here. Email the paper name to hirenjsca@gmail.com and we will add it.
Draw the projections of the following points on the same xy line keeping the projectors 25 mm apart.
Draw the projections of a 100 mm long line PQ which is inclined at an angle of 45° to H.P. and 30° to V.P. One of its end point ‘P’ is in H.P. as well as in VP.
Draw an ellipse by concentric circle method given the major and minor axis are 120 mm and 80 mm respectively.
Construct logarithmic spiral for one convolution. Given the length of the shortest radius vector equal to 10 mm and the ratio of the lengths of the successive radius vectors equal to 7/5 for vectorial angle of 45°.
The distance between the end projectors of line AB is 60 mm. Line AB has its end A 20 mm above H.P. and 25 mm in front of V.P. The other end B is 45 mm above H.P. and 55 mm in front of V.P. Draw projections of line AB.
ABCD is a rhombus of diagonals AC = 110 mm and BD =70 mm. Its corner A is in the H.P. and the plane is inclined to H.P. such that the plan appears to be a square. The plan of diagonal AC makes an angle of 20° to the V.P. Draw the projections of the plane and find its inclination with H.P. (Hint. Take a scale of 1:2)
A circular plate of diameter 50 mm is resting on H.P. on a point on the circumference with its surface inclined at 45° to H.P. and perpendicular to V.P. Draw its projections.
A square plate PQRS of side 35 mm is resting on corner P with diagonal PR making 30° with H.P. and diagonal QS inclined to V.P. by 60° and parallel to H.P. Draw the projections of the square plate PQRS.
A hexagonal pyramid, side of base 25 mm and axis 55 mm long, has one of its slant edges on the H.P. This slant edge is inclined at 45° to the V.P. Draw its projections when the apex is nearer to V.P.
A cone, base diameter 80 mm and axis length 80 mm is resting on its base on the H.P. It is cut by an AIP inclined at 45° to the H.P. and cutting the axis at 30 mm from the apex. Draw front view, sectional top view and true shape of the section.
Using first angle projection method, draw F.V. and T.V. of the object given in Figure
List the seven essential commands of modify panel in AutoCAD, state their usage and explain their execution in workspace.
Using third angle projection method, draw F.V. and R.H.S.V. of the object given in Figure 2.
Write name of the following AutoCAD command symbols, state their use and explain their execution.
Questions repeat across sessions. Working through two or three papers shows you which topics GTU asks most.
BE Common
Send this paper to your class group. Every question has its own link.
Official Gujarat Technological University (GTU) examination paper for Engineering Graphics & Design (Winter 2025, B.E. · Common Engineering, Sem 1). Features complete 70-mark regular & remedial examination pattern, official marking distribution across all 5 questions, and direct 1-click official PDF download.
Transcribed for student exam preparation from Gujarat Technological University official examination archives. Questions, syllabus guidelines, and curriculum marking schemes remain the intellectual property of Gujarat Technological University.
BE01000061 Engineering Graphics & Design
Official GTU PDF · Winter 2025
The PDF could not be loaded from the university's website.
Open the PDF directly