Gujarat Technological UniversitySummer 2025 examination

GTU BE01000061 Engineering Graphics & Design Summer 2025 Question Paper & PDF

B.E. · Common Engineering · Semesters 1 and 2 · Subject code BE01000061
Download official PDFView PDF here
Share with your class
Total
70 marks
To pass
23 marks (33%)
Duration
2.5 Hours 10:30 AM – 1:00 PM
Questions
5 with internal choice
No solutions on this paper yetNeed them for your exam? Ask once. Papers that students ask for are solved first, and we aim to add them within 24 hours.

Q.1

14 Marks
(a)
3 marks
Draw regular pentagon and hexagon of 30 mm side using UNIVERSAL METHOD
(b)
4 marks
The distance between two towns is 250 km and is represented by a line of length 50mm on a map. Construct a scale to read 600 km and indicate a distance of 530 km on it.
(c)
7 marks
Draw an Archemedian spiral of 1.5 convolutions, the largest & the smallest radius being 55 mm & 10 mm respectively. Draw tangent & normal to the spiral at a point 40 mm from the pole

Q.2

14 Marks
(a)
3 marks
Draw following projection of points:
1Point ‘A’ is 25 mm above HP and 20 mm Infront of VP.
2Point ‘B’ is 35 mm behind VP and 40 mm above HP.
3Point ‘C’ is in the HP and 10 mm Infront of VP
(b)
4 marks
Draw projections of line AB=85 mm inclined to 60∘60^{\circ} HP & 30∘30^{\circ} VP
(c)
7 marks
The distance between the end projectors of a straight-line PQ is 130mm. The end P is 40mm below HP and 25mm in front of the VP. Q is 75 mm above HP and 30 mm behind VP. Draw its projections. Find TL of the line
(c)
7 marks
The elevation of line AB, 80 mm long, measures 55 mm. The end A is 20 mm above H.P. and 10 mm in front of V.P. Draw the projection of the line and finds its true inclination with H.P. and V.P, if the end B is 25 mm below H.P. and is behind V.P

Q.3

14 Marks
(a)
3 marks
Enlist types of lines.
(b)
4 marks
ABC is a triangle of sides AB = 75 mm, BC = 60 mm and CA = 45 mm. Its longest side is in H.P. Its surface makes an angle of 45∘45^{\circ} with the H.P. Draw its projections.
(c)
7 marks
A pentagonal plate, side 25 mm is resting on H.P. on one of its corners with opposite edge to the corner making 30∘30^{\circ} with V.P. The plate is inclined to H.P. by 45∘45^{\circ}. Draw the projections of regular pentagonal plate
(a)
3 marks
Define the following curves : involute, ellipse and cycloid.
(b)
4 marks
A hexagonal plane of 30 mm side, rests on the V.P. on an edge such that the surface is inclined at 45∘45^{\circ} to the V.P. Draw its projections
(c)
7 marks
A circular plane having the diameter 50 mm is resting with point A of its periphery on H.P. The surface of the plane is inclined to H.P. such that the plan of the plane becomes an ellipse with minor axis 30mm.Draw the projection of the plane when the plan of the diameter through point A is inclined at 30o to V.P.and the centre of the plane is 40mm from V.P.Find the inclination of the plane with H.P.

Q.4

14 Marks
(a)
3 marks
Classify solids with shapes of drawings
(b)
4 marks
Differentiate between aligned system and unidirectional system of dimensioning
(c)
7 marks
A square pyramid, side of base 35 mm and axis length 50 mm is lying on the H.P. on one of its triangular faces. Draw the projections of the pyramid when the base edge contained by the triangular face on H.P. makes an angle of 45∘45^{\circ} on the V.P. keeping apex of the pyramid towards the observer
(a)
3 marks

Differentiate between

1Square pyramid and tetrahedron
2Cube and square prism
(b)
4 marks
A cone 40 mm diameter and 50 mm axis is resting on one generator on HP. Draw it’s projections
(c)
7 marks
A hexagonal prism, edge of base 20 mm and axis 50 mm long, rests with its base on HP such that one of its rectangular faces is parallel to VP. It is cut by a plane perpendicular to VP, inclined at 45∘45^{\circ} to HP and passing through the right corner of the top face of the prism. (i) Draw the sectional top view.

Q.5

14 Marks
(a)
3 marks
Define Representative Fraction. With reference to Representative Fraction, classify the scales
(b)
4 marks
Differentiate between prism and pyramid
(c)
7 marks
Fig. 1 shows pictorial view of an object. Draw Sectional Elevation from – X and Plan. In the figure 1, the arrow shows “X” direction.
GTU Engineering Graphics & Design (BE01000061) Summer 2025 Question 5(c) Diagram
(a)
3 marks
Enlist methods for drawing Ellipse.
(b)
4 marks
Write the comparison between first angle projection method and third angle projection method
(c)
7 marks
Draw the front view looking from X –direction and plan of a object shown in Figure 2 using first angle projection method
GTU Engineering Graphics & Design (BE01000061) Summer 2025 Question 5 OR (c) Diagram

More Engineering Graphics & Design papers

Questions repeat across sessions. Working through two or three papers shows you which topics GTU asks most.

Summer 202670 marks · 5 questions
Winter 202570 marks · 5 questions
Winter 202470 marks · 5 questions

Other Semester 1 subjects

BE Common

3110001
Chemistry
3110002
English
3110003
Programming for Problem Solving
3110004
Basic Civil Engineering

Preparing with friends?

Send this paper to your class group. Every question has its own link.

About this paper

Official Gujarat Technological University (GTU) examination paper for Engineering Graphics & Design (Summer 2025, B.E. · Common Engineering, Sem 1). Features complete 70-mark regular & remedial examination pattern, official marking distribution across all 5 questions, and direct 1-click official PDF download.

Transcribed for student exam preparation from Gujarat Technological University official examination archives. Questions, syllabus guidelines, and curriculum marking schemes remain the intellectual property of Gujarat Technological University.

Download official PDF All Engineering Graphics & Design Papers (4) →Report a typo or correction
ViewDownload PDF