Gujarat Technological UniversitySummer 2023 examination

GTU 3150613 Pavement Design and Highway construction Summer 2023 Question Paper & PDF

B.E. · Civil Engineering · Semester 5 · Subject code 3150613
Download official PDFView PDF here
Share with your class
Total
70 marks
To pass
23 marks (33%)
Duration
2.5 Hours 2:30 PM – 5:00 PM
Questions
5 with internal choice
No solutions on this paper yetNeed them for your exam? Ask once. Papers that students ask for are solved first, and we aim to add them within 24 hours.

13 of 25 questions on this paper were also asked in other years. Each is marked below with the years it appeared.See all 28 repeated 3150613 questions, most asked first

Q.1

14 Marks
(a)
3 marksAsked in 2 of 7 papers
What is the difference between bitumen and tar?

Also asked in Winter 2025 Q1b

(b)
4 marks
Discuss the environmental characteristics of pavement design.
(c)
7 marks
Enlist the tests performed for aggregates and explain the Deval abrasion test in detail

Q.2

14 Marks
(a)
3 marks
Define
i)Lane distribution factor,
ii)Vehicle damage factor, and
iii)Equivalent single axle load.
(b)
4 marks
Write a note on
i)cutback bitumen and
ii)bitumen emulsion.
(c)
7 marksAsked in 3 of 7 papers

Explain various types of joints used in concrete pavements. Point out the differences in their functions.

Also asked in Summer 2026 Q4c, Winter 2024 Q2c

(c)
7 marksAsked in 2 of 7 papers

Explain the combined effect of temperature stress and load stress considered in concrete pavements.

Also asked in Winter 2023 Q4c OR

Q.3

14 Marks
(a)
3 marks

Explain briefly the construction procedure of granular sub-base in bituminous pavement.

(b)
4 marksAsked in 4 of 7 papers
Explain the concept of fatigue failure and rutting failure in bituminous layer.

Also asked in Summer 2026 Q3b, Winter 2024 Q2c OR, Summer 2024 Q3b

(c)
7 marksAsked in 2 of 7 papers
Explain the design principles for design of dowel bars and tie bars.

Also asked in Winter 2024 Q3b OR

(a)
3 marksAsked in 2 of 7 papers
Distinguish between seal coat, prime coat and tack coat.

Also asked in Winter 2024 Q4a OR

(b)
4 marksAsked in 2 of 7 papers
Discuss various vehicle parameters considered in design of pavement.

Also asked in Summer 2024 Q3b OR

(c)
7 marksAsked in 2 of 7 papers

Mention various steps involved in pavement design of bituminous pavements as per IRC:37.

Also asked in Summer 2024 Q3c OR

Q.4

14 Marks
(a)
3 marks
Write a note on: mud pumping.
(b)
4 marksAsked in 3 of 7 papers

Explain the importance of dry lean concrete in construction of rigid pavement as per IRC-49.

Also asked in Winter 2024 Q3c OR, Winter 2023 Q2c OR

(c)
7 marks

Mention the steps followed in estimating the quantity of aggregates and binder in surface dressing.

(a)
3 marksAsked in 2 of 7 papers
Discuss the causes of pavement bleeding.

Also asked in Winter 2024 Q5a

(b)
4 marksAsked in 2 of 7 papers
Differentiate between wet mix macadam and water bound macadam.

Also asked in Summer 2026 Q4b

(c)
7 marks

What is Interlocking Concrete Block Pavement (ICBP). Also explain its procedure of laying.

Q.5

14 Marks
(a)
3 marksAsked in 2 of 7 papers
Differentiate between hot in place and cold in place.

Also asked in Winter 2024 Q5c OR

(b)
4 marks
Write a note on pavement roughness.
(c)
7 marks

Describe various types of distresses in pavement and also explain possible surface maintenance measures.

(a)
3 marks
Write a note on: slurry seal.
(b)
4 marks
Explain briefly the cold mix technology as per IRC SP-100.
(c)
7 marksAsked in 2 of 7 papers

Explain the importance of ultra-thin white topping over the conventional white topping.

Also asked in Winter 2025 Q5c

More Pavement Design and Highway construction papers

Questions repeat across sessions. Working through two or three papers shows you which topics GTU asks most.

Preparing with friends?

Send this paper to your class group. Every question has its own link.

About this paper

Official Gujarat Technological University (GTU) examination paper for Pavement Design and Highway construction (Summer 2023, B.E. · Civil Engineering, Sem 5). Features complete 70-mark regular & remedial examination pattern, official marking distribution across all 5 questions, and direct 1-click official PDF download.

Transcribed for student exam preparation from Gujarat Technological University official examination archives. Questions, syllabus guidelines, and curriculum marking schemes remain the intellectual property of Gujarat Technological University.

ViewDownload PDF